经Opuntia dilenii haw植物提取液绿色合成制备的纳米铝酸锌的催化性质(英文)

Various nanosized zinc aluminate(ZnAl2O4) samples were prepared by a conventional and a mi- crowave method both with and without using Opuntia dilenii haw plant extract,and were charac- terized by X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR),high resolution scanning electron microscopy(HRSEM),energy dispersion scanning(EDX),temperature dependent conductance measurements, thermoelectric power measurements, ultraviolet-visible (UV-Vis) diffuse reflectance spectroscopy,and photoluminescence spectroscopy.The formation of a pure ZnAl2O4 phase was confirmed by XRD and FT-IR.A change in morphology from nanosized plates to nanosized sheets with,respectively,the conventional and microwave heating methods was clearly shown by HRSEM.UV-Vis diffusion reflectance spectroscopy measured the band gaps of ZnAl2O4 nanosized plates and nanosized sheets as 3.5 and 3.9 eV,respectively.The synthesized ZnAl2O4 was single crystalline and has three photoluminescence emissions at 482,528,and 540 nm.ZnAl2O4 nanosized sheets prepared by the microwave method showed higher catalytic activity for the oxida- tion of benzyl alcohol(85% conversion) than ZnAl2O4 nanosized plates prepared by the convention- al method(60% conversion).     

Thermoluminescence studies of UV-irradiated Y2O3:Eu3+ doped phosphor

The present paper reports thermoluminescence (TL) glow curves of Eu³⁺-doped Y₂O₃ phosphor with different ultraviolet (UV) exposure times. The glow peak shows second-order kinetics of Eu³⁺-doped Y₂O₃, and corresponding kinetic parameters were evaluated using the peak shape method. Calculations of trap depth were carried out using different methods. The kinetics order, activation energy, and frequency factor were calculated. The recorded glow curve shifts towards higher intensity with longer UV exposure. The heating rate used for recording TL was 3.0 °C s^?1. Particle size and structure were verified by X-ray diffraction (XRD) pattern and morphology by scanning electron microscopy (SEM) imaging.     

Total synthesis of (6Z,9S)-3,4-trans-9-hydroxy-3-methyldodec-cis-6-en-4-olide and (6Z)-3,4-trans-9-oxo-3-methyldodec-cis-6-en-4-olide γ-butyrolactones

The first total synthesis of (6Z,9S)-3,4-trans-9-hydroxy-3-methyldodec-cis-6-en-4-olide and (6Z)-3,4-trans-9-oxo-3-methyldodec-cis-6-en-4-olide was achieved in a convergent pathway. The salient features of our synthesis include Ohira–Bestmann reaction, regioselective alkyne addition to terminal epoxide, TEMPO/BAIB mediated oxidative lactonization, and partial hydrogenation.     

Palladium complex in a room temperature ionic liquid: a convenient recyclable reagent for catalytic oxidation

Palladium (Pd)-catalyzed carbonylation of alcohols proceeds in ionic liquid (IL) media (1-ethyl-3-methylimidazolium hexafluorophosphate). Carbonylation of primary/secondary alcohols to aldehydes/ketones was greatly accelerated by the use of a Pd-based catalyst in the presence of NaOCl as an oxidant. The catalyst was more easier to recycle in the IL [Emim]PF₆ with an equal-proportioned CH₂Cl₂ than in the single CH₂Cl₂ or IL.     

Torsional control by intense pulses

We generalize the concepts of alignment and 3D alignment by moderately intense laser pulses to control both the overall rotations and the torsional motions of polyatomic molecules. Torsional control is applied to manipulate charge transfer events, hence introducing a potential route to light controlled molecular switches. Potential applications in areas such as molecular assembly, molecular spectroscopies, energy transfer, and molecule-based junctions are envisioned.     

Charge carrier decay and diffusion in organic–inorganic CH3NH3PbI3–xClx perovskite based solar cell

In recent years, organic–inorganic lead halides attracted widespread interest, mainly due to their impressive photoconversion properties and low‐cost solution processing. In this study, we employed small amplitude transient photovoltage and photocurrent spectroscopy to investigate charge transport and recombination properties of perovskite CH₃NH₃PbI_3–xCl_x solar cell under realistic light harvesting conditions (<1 sun). Cell structure resembles outlay commonly found in organic photovoltaics, with perovskite absorber being sandwiched between two thin layers of organic polymers. Tested device displayed high power conversion efficiency (10.3%), good fill factor and negligible hysteresis effect. Fundamental device parameters were characterized at various open‐circuit voltages (V_oc) by examination of small voltage and current perturbations created by the low intensity pulsed laser excitations. The obtained results exhibit long charge carrier lifetimes and fast charge transport over the full range of applied optical bias, as well as remarkable diffusion lengths exceeding 1 μm. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Gold Decorated Graphene by Laser Ablation for Efficient Electrocatalytic Oxidation of Methanol and Ethanol

A well‐known limitation in the fabrication of metal‐graphene composite has been the use of surfactants that strongly adsorb on the surface and reduce the performance of the catalyst. We demonstrate here a novel one‐pot synthesis of gold nanoparticles by laser ablation of gold strip and in‐situ decoration on graphene substrate. Not only the impregnation of nanoparticles was linker free, but also the synthesis by itself was surfactant‐free. The composite materials were well characterized morphologically and functionally using electron microscopy, X‐ray and electron diffraction, Raman spectroscopy, Zeta potential, electrochemical measurements and UV‐Visible spectroscopic techniques. This linker‐free gold‐graphene based composite has been employed for catalytic applications pertaining to electrooxidation. We have explored the use of this composite as a binder‐free electrode in electrocatalytic oxidation of methanol and ethanol in alkaline medium. Additionally, the onset potential for ethanol oxidation was found to be more negative, ?100 mV, an indication of its promising application in direct ethanol fuel cells.     

Microwave sintering of nickel ferrite nanoparticles processed via sol–gel method

Magnetic nickel ferrite (NiFe₂O₄) was prepared by sol–gel process and calcined in the 2.45 GHz singlemode microwave furnace to synthesize nickel nanopowder. The sol–gel method was used for the processing of the NiFe₂O₄ powder because of its potential for making fine, pure and homogeneous powders. Sol–gel is a chemical method that has the possibility of synthesizing a reproducible material. Microwave energy is used for the calcining of this powder and the sintering of the NiFe₂O₄ samples. Its use for calcination has the advantage of reducing the total processing time and the soak temperature. In addition to the above combination of sol–gel and microwave processing yields to nanoscale particles and a more uniform distribution of their sizes. X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy and vibrating sample magnetometer were carried out to investigate structural, elemental, morphological and magnetic aspects of NiFe₂O₄. The results showed that the mean size and the saturation magnetization of the NiFe₂O₄ nanoparticles are about 30 nm and 55.27 emu/g, respectively. This method could be used as an alternative to other chemical methods in order to obtain NiFe₂O₄ nanoparticles.